Are you tired of struggling with a malfunctioning cruise control system on your Ford F150? Don’t worry, you’re not alone. Fortunately, replacing the cruise control switch on your Ford F150 is a relatively simple process that can save you time and money in the long run.
In this guide, we’ll walk you through the steps to replace the cruise control switch on your Ford F150, so you can get back on the road with a functioning cruise control system.
How to Replace Cruise Control Switch on Ford F150?
Replacing the cruise control switch on a Ford F150 requires a few tools and materials. Here are the items you’ll need:
Tools
- 8mm socket and ratchet
- 8mm wrench
- Pick
- Flathead screwdriver
- Pliers
- Trim panel removal tool
Materials
- New cruise control switch
- Electrical cleaner
- Dielectric grease
Before starting the replacement process, it’s important to make sure you have all the necessary tools and materials. The 8mm socket and wrench will be used to remove the bolts and nuts holding the steering column covers in place. The pick and flathead screwdriver will be used to remove the electrical connectors and clips. The pliers and trim panel removal tool will be used to remove the trim panels and clips.
The new cruise control switch is the most critical material needed for the replacement process. It’s important to purchase a genuine OEM part to ensure it fits and functions properly. Additionally, electrical cleaners and dielectric grease should be used to clean and lubricate the electrical connectors to ensure a good connection.
Read: How to Replace Ford Emblem on F150 Tailgate
The thing is that, having the right tools and materials is crucial for a successful cruise control switch replacement on a Ford F150.
How To Locate The Cruise Control Switch
The cruise control switch on a Ford F150 is located on the left side of the steering wheel. It is a cluster of buttons that allow the driver to set and adjust the vehicle’s speed without having to constantly check the speedometer. Here are the steps to locate the cruise control switch:
- Sit in the driver’s seat of the Ford F150 and adjust the steering wheel to a comfortable position.
- Look at the left side of the steering wheel. You should see a cluster of buttons that are labeled with different symbols. These symbols indicate the different functions of the cruise control switch.
- The cruise control switch is typically located in the center of the cluster. It is usually marked with the symbol that looks like a speedometer with an arrow pointing up.
- If you are having trouble locating the cruise control switch, consult the owner’s manual for your Ford F150. The manual should have a diagram or illustration that shows the location of the switch.
- Once you have located the cruise control switch, you can begin the process of replacing it. Disconnect the wires from the battery, remove the airbags, separate the plugs and cables, and remove and install the new cruise control switch, following the steps provided in the manufacturer’s instructions.
It is best to keep in mind that the process of replacing the cruise control switch on a Ford F150 can be complex and should only be attempted by someone with experience in automotive repair. If you are not comfortable performing this task yourself, it is recommended that you take your vehicle to a certified mechanic for assistance.
How To Remove The Old Cruise Control Switch
To replace the cruise control switch on a Ford F150, the first step is to remove the old switch. Here are the steps to follow:
- Disconnect the negative battery cable to prevent any electrical shock or damage.
- Remove the airbag from the steering wheel. This can be done by removing the screws that hold it in place and gently pulling it off.
- Remove the steering wheel cover by unscrewing the screws that hold it in place. This will give you access to the cruise control switch.
- Locate the cruise control switch and disconnect the wiring harness from it. This can be done by pressing the tab on the connector and pulling it out.
- Remove the screws that hold the cruise control switch in place. These screws are usually located on the back of the steering wheel.
- Gently pull the cruise control switch out of the steering wheel.
It is important to handle the airbag and steering wheel cover with care to avoid any damage. It is also important to keep track of the screws and wiring harness to ensure that everything is reconnected properly when installing the new cruise control switch.
By following these steps, the old cruise control switch can be safely and easily removed from the Ford F150.
Installing the New Cruise Control Switch
Once the old cruise control switch has been removed, it’s time to install the new one. Here are the steps:
- Reattach the wiring harness: The first step is to reattach the wiring harness to the new cruise control switch. Make sure that you connect the right wires to the right pins. If you’re not sure, consult the wiring diagram in your vehicle’s manual.
- Mount the switch: Once the wiring harness is attached, mount the switch onto the steering wheel. Make sure that it’s aligned properly and that the screws are tightened securely.
- Reattach the airbag: If you had to remove the airbag to access the cruise control switch, now is the time to reattach it. Make sure that it’s properly aligned and that all the screws are tightened securely.
- Test the switch: Before you put everything back together, test the new cruise control switch to make sure that it’s working properly. Turn on the ignition and press the “On” button. The cruise control light should come on. Then, press the “Set” button. The vehicle should maintain a constant speed. If the switch isn’t working, double-check the wiring connections and try again.
It’s crucial to take your time during the installation process to make sure that everything is done correctly. If you’re not comfortable working on your vehicle’s electrical system, it’s best to take it to a professional mechanic.
Testing the New Cruise Control Switch
After installing the new cruise control switch on your Ford F150, it is important to test it to ensure it is working correctly. Follow these steps to test the new switch:
Check: How to Turn Off Traction Control on Ford F150
- Start your engine and press the “on” button on the cruise control switch. The cruise control light should illuminate on your dash or instrument cluster.
- Activate your cruise control and ensure that your vehicle maintains a constant speed.
- Test each button on the switch to ensure that they are functioning properly. Ensure that the “resume” and “set” buttons work as intended and that the “cancel” button disengages the cruise control.
If any of the buttons do not work correctly, you may need to reinstall the switch or seek professional assistance. It is important to ensure that your cruise control is functioning properly for safe and comfortable driving.
In addition to testing the switch, it is also important to program your vehicle using the IDS tool to ensure that the new switch is properly installed. Be patient and follow the instructions on the IDS tool screen.
Replacing Cruise Control Switches 97-04 Ford F-150
Conclusion
As you can see, replacing the cruise control switch on a Ford F150 is a task that requires some technical knowledge and skill. However, with the right tools and instructions, it can be done successfully.
It is important to note that safety should always be a top priority when working on a vehicle. Disconnecting the battery and following proper procedures for handling airbags are essential steps to take before starting any work on the steering column.
When selecting a replacement cruise control switch, it is advisable to choose an OEM part to ensure proper compatibility and functionality. Additionally, having the dealer flash the computer after installation can help avoid any potential issues with the vehicle’s system.
With that said, replacing the cruise control switch on a Ford F150 is a manageable task that can be accomplished with the right tools, instructions, and safety precautions. By following the steps outlined in this article, anyone with a basic understanding of automotive repair can successfully complete this task and enjoy the benefits of a fully functioning cruise control system.