The Ford emblem on the tailgate of your F150 is a symbol of pride for many Ford truck owners. However, over time, the emblem can become worn, fade, or even fall off completely. If you’re looking to replace the emblem on your F150 tailgate, you’ll be happy to know that it’s a relatively simple process that can be done at home with just a few basic tools.

In this guide, we’ll show you step-by-step how to replace the Ford emblem on your F150 tailgate and restore your truck’s iconic look.

What Tools And Materials You Should Have

Tools Required

When replacing the Ford emblem on an F150 tailgate, there are several tools that will be necessary to complete the job. These tools include:

• Heat gun or hair dryer
• Flathead screwdriver or putty knife
• Pliers or another gripping tool
• Thin wire or dental floss
• Cloth or other soft material to protect the paint

Materials Required

In addition to the necessary tools, there are also a few materials that will be required to replace the emblem. These materials include:

• Replacement emblem
• Adhesive remover (optional)
• Adhesive promoter (optional)

When selecting a replacement emblem, it is important to ensure that it is the correct size and shape for the F150 tailgate. Adhesive remover and adhesive promoter can be helpful in ensuring that the new emblem adheres properly to the tailgate.

Read: How to Replace Front Turn Signal Bulb on Ford F150

Before beginning the replacement process, it is important to gather all of the necessary tools and materials to ensure a smooth and efficient process.

How To Remove The Old Emblem

To replace the Ford emblem on an F150 tailgate, the first step is to remove the old emblem. Here are the steps to follow:

1. Open the tailgate and clean the surface around the emblem with a soft cloth to remove any dirt or grime.
2. Heat the emblem with a heat gun or hairdryer for a few minutes to loosen the adhesive.
3. Use a plastic pry tool or a flathead screwdriver to gently pry the emblem from the tailgate. Be careful not to scratch or damage the paint.
4. Once the emblem is loose, use pliers or your fingers to pull it off completely.
5. Clean any remaining adhesive residue from the tailgate with a solvent such as Goo Gone or rubbing alcohol.

It is important to note that the emblem may break during removal, especially if it has been on the tailgate for a long time. In this case, it may be necessary to use a razor blade to carefully scrape off the remaining adhesive and then apply new adhesive to attach the new emblem.

Overall, removing the old emblem is a relatively straightforward process, but it requires patience and care to avoid damaging the tailgate or the new emblem. By following these steps, anyone can replace the Ford emblem on their F150 tailgate with ease.

Preparing the Tailgate for the New Emblem

Before replacing the Ford emblem on the F150 tailgate, it is important to properly prepare the surface. This will ensure that the new emblem adheres correctly and lasts for a long time. Here are some steps to follow:

1. Remove the old emblem: Use a heat gun or hair dryer to soften the adhesive. Gently pull the emblem away from one side. If it doesn’t come off easily, use a flat head tool or dental floss to pry it off. Be careful not to scratch the paint.
2. Clean the surface: Use a mild soap and water to clean the area where the old emblem was. Make sure to remove any dirt, debris, or adhesive residue. Dry the surface with a clean towel.
3. Sand the surface: Use a fine-grit sandpaper to lightly sand the area where the old emblem was. This will help the new emblem adhere better. Wipe away any dust with a clean cloth.
4. Apply rubbing alcohol: Use a cloth soaked in rubbing alcohol to wipe the surface. This will remove any remaining dirt, oil, or wax that could interfere with the adhesive.
5. Dry the surface: Allow the surface to air dry for a few minutes. Make sure it is completely dry before applying the new emblem.

Check: How to Replace Window Switch on Ford F150

By simply following these steps, you can prepare the tailgate for the new Ford emblem. This will ensure that the emblem adheres properly and looks great for years to come.

How To Install The New Emblem

Once the old emblem has been removed, it’s time to install the new one. Here are the steps to follow:

1. Clean the area around the emblem thoroughly with soap and water to remove any dirt and debris.
2. Dry the area completely with a clean towel.
3. Peel off the backing from the new emblem’s adhesive tape.
4. Carefully align the emblem with the holes on the tailgate.
5. Press the emblem firmly onto the tailgate, making sure it is centered and level.
6. Hold the emblem in place for a few seconds to ensure the adhesive tape adheres well.

It’s best to keep in mind that some emblems may require additional steps or hardware for installation. Refer to the manufacturer’s instructions for specific details.

It’s also a good idea to double-check the emblem’s alignment and placement before the adhesive tape sets completely. This will ensure that the emblem is properly installed and looks great on the truck.

There’s no doubt that installing a new Ford emblem on an F150 tailgate is a straightforward process that can be done with minimal tools and time. With just a few steps, truck owners can have a new emblem installed and add value back to their vehicles.

F-150 Tailgate Emblem Replacement

Conclusion

Replacing the Ford emblem on an F150 tailgate is a relatively straightforward process that can be accomplished with basic tools and a little patience. As with any DIY project, it is important to take your time and follow the steps carefully to ensure a successful outcome.

One of the most important things to keep in mind when replacing the emblem is to clean the tailgate surface thoroughly before applying the new emblem. This will help ensure a strong bond between the emblem and the tailgate, and will also help prevent any dirt or debris from getting trapped under the emblem.

Another key consideration is to use the right tools for the job. A heat gun or hair dryer can be used to soften the adhesive on the back of the emblem, making it easier to remove. A flat-head screwdriver or dental floss can also be used to pry the emblem off the tailgate.

Once the old emblem has been removed, it is important to carefully align the new emblem with the mounting holes on the tailgate. Applying a small amount of lubricant to the back of the emblem can also help ensure a smooth installation.

With that said, replacing the Ford emblem on an F150 tailgate is a relatively simple process that can be completed with a few basic tools and a little bit of know-how. By following these simple steps, you can give your truck a fresh new look and help protect your investment for years to come.